Mitigation of Insert Separator Damage in Open-End Machines

Filly Pravitasari; AFRIANI KUSUMADEWI; Feny Nurherawati

doi:10.37577/sainteks.v5i1.459

Filly Pravitasari
AFRIANI KUSUMADEWI DOSEN UICM
Feny Nurherawati

DOI: https://doi.org/10.37577/sainteks.v5i1.459

Keywords: Open-end spinning, Insert separators, Slub Yarn, Insert Separators, Open-end Spinning, Slub Yarn

Abstract

Insert separators are part of the Open-end spinning machine that plays an important role in the process of feeding the fiber to the rotor. The function of the insert separators is as a conductor of drawing sliver which has been combed into individual fibers by adjusting the angle point of the insert separators. Damage to insert separators affects the number of slub yarns in the process of making Open-end spinning yarn. Consumption of using the separator insert continuously can make damage (eroded). The damage occurred during 20 days (four weeks) of 35.25 times of observation. The number of damaged separator inserts requires a repair whether the repair is done by patching, but in fact repair by patching is not an effective way, because the age of the patch only lasts approximately 1 week. Therefore, patch repair is not carried out, the best effort is to replace the separator insert.

References

Abdul Latief Sulam. 2008. “Smkteknologi-Pembuatan-Benang-Dan-Pembuatan-Kain1abdul-Pdf-111116131831-Phpapp02.”
Ardian, Aan. 2010. Perawatan Dan Perbaikan Mesin.
Bhagya, T.G., & Prakarsa, G. (2020). Model Keputusan Penentuan Jenis Distribusi dari Kerusakan Bearing pada Mesin TFO di PT XYZ, Sisinfo, 2, 134-142.
Ganjar Ridwan Sanjaya. 2014. Gambar 2.1 Aliran Bahan Pada Mesin Open End.
Hanafi, Mochammad Yusuf. 2014. “Politeknik STTT Bandung: PENGAMATAN PEGARUH CACAT PERMUKAAN ROTOR TERHADAP KETIDAKRATAAN BENANG KAPAS 20S PADA MESIN OPEN END SCHLAFHORST AUTOCORO TIPE SRZ 117.” Retrieved July 28, 2022 (https://repository.stttekstil.ac.id/jspui/handle/123456789/47).
Liu, Xiuping, Zhijie Wen, Zhixun su, and ka Fai Choi. 2008. “Slub Extraction in Woven Fabric Images Using Gabor Filters.” Textile Research Journal 78(4):320–25. doi: 10.1177/0040517507090495.
Lu, Yuzheng, Weidong Gao, and Hongbo Wang. 2007. “A Model for the Twist Distribution in the Slub-Yarn.” International Journal of Clothing Science and Technology 19(1):36–42. doi: 10.1108/09556220710717035/FULL/XML.
Mahmood, N., M. Iftikhar, T. Mahmood, and M. Arshad. 2009. “Technological Study of Ring and Compact Spinning Systems for the Manufacturing of Slub Fancy Yarn under Multiple Slub Variations and Its Effect on Woven Fabric.” Pakistan Journal of Agricultural Sciences 46(2):124–29.
Pujianto, Hendri, Fajar Pitarsi Dharma, Darmawan Hindardi, and Tuti Purwati Tuwarno. 2021. Penentuan Setelan Rotor Mesin Open End Untuk Pembuatan Benang Ne 6 Sebagai Upaya Jaminan Atas Spesifikasi Dan Kualitas Pada Workshop Pemintalan Di Ak-Tekstil Solo. Vol. 4. Online. doi: 10.22146/ijl.v4i2.66993.
Rahman, Ismail, Aco. 2016. “Predictive Maintenance (PdM) Dengan Sistem Major Overhaul Pada Mesin Diesel Mirrless Blackstone ELS 16 MK 2 Di PLTD Poasia.” 2(2).
Siregar, Yusniar, Mochammad Danny Sukardan, Dermawati Suantara, and Rizal Fahruroji. 2019. “Aplikasi Benang Slub Untuk Pembuatan Produk Window Covering.” Arena Tekstil 34(2):93–100. doi: 10.31266/at.v34i2.5669.